QM INDUSTRIES QMFX22J110SET Flange Block Bearings

Weight:0.0070 Kg; Grease Limiting Speed:38000 rpm; Outside Diameter D:19.0000 mm; Clearance:C3; Features:Contact Seals; Outside Ring Width B:6.000 mm; Oil Limiting Speed:45000 rpm; Cr - Dynamic Load Rating:2.3 kN; Radius Rs min:0.300 mm; Bore Size d:7 mm;

Retainer Type:Punching; D:52; Rolling Element Material:Steel; Type:Angular Contact Ball; Bearing Style:Open Type; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Max. Allowed rpm(rpm):8500; Basic Dynamic Load Rating(N):16900; Size Standards:Metric System;

d:19.05 mm; H:72 mm; A:20 mm; Weight:0.43 kg; SW:3.18 mm; Designation of housing:C204-; S:7 mm; A3:1.5 mm; B:25 mm; T max.:100 °C;

Number of Bearings:Double; Volume Discount:Available; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Shape:Flange Type; Bearing Material:[Steel] Steel; Flange O.D. H(φ):45; Bearing Used:Deep Groove Ball Bea; Width T(mm):35; Bearing Retained:Yes (with retaining;

Dimension L:22.5 in; Dimension H1:1.5 in; Bolt Size:4 x M24; Bearing Type:Split Cylindrical Re; Support Type:Four-Bolt Plummer Bl; Shaft Size:7-15/16 in; Note:This product line wa; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Number:LSE715BR; Dimension H2:19.5 in;

Dynamic load, C:665 kN; d1:196.8 mm; ra max:3 mm; Fatigue limit load, Cu:76.5 kN; Characteristic inner ring frequency, BPFI:8.32 Hz; Min operating temperature, Tmin:-40 °C; F:180 mm; Max operating temperature, Tmax:120 °C; Static load, C0:795 kN; Characteristic outer ring frequency, BPF0:5.68 Hz;

Number of Bearings:Single; Bearing I.D. d(mm):10; Shape:Bottom Mount; Days to Ship:8 Days; Type:Bearings with Housin; Width T(mm):12; Shape:Bottom Mount; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Height Indication:Height Configurable;

Days to Ship:8 Days or more; Material:1045 Carbon Steel; Surface Treatment:Black Oxide Coating; L(mm):20 ～ 30; RoHS:6; O.D. H(φ):14; Pin Dia. D(φ):10;

Bearing Width:6.000 mm; do - Ball Diameter:3.175000 mm; Da - Outer Ring Backing Diameter:19.600 mm; r - Outer Ring To Clear Radius3:0.3 mm; D:22.000 mm; d:10 mm; Bearing Weight:0.010 Kg; Contact Angle:25 º; da - Inner Ring Backing Diameter:13.000 mm; Ball Type:STEEL;

Cone Part Number:99537; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:67000 lbf; B - Cone Width:2.6250 in; Series:99000; da - Cone Frontface Backing Diameter:6.14 in; Cg - Geometry Factor:0.146; d:5.3750 in; C1 - Dynamic Radial Rating (Two-Row, 1 million

Unit, Type:Insert Bearing Unit; Accessory:With steel plate cov; Fit:J7; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Diameter series symbol:Medium Load; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Seal:Silicone; Surface Treatment:No

Radial clearance class:C3; Da max:31 mm; da min:14 mm; Dynamic load, C:8.2 kN; Characteristic inner ring frequency, BPFI:3.92 Hz; d:10 mm; Nlim (grease):23,000 rpm; B:11 mm; D:35 mm; Mass:0.05 kg;

A1:12 mm; S:8.5 mm; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; L3:64 mm; N2:37 mm; L1:78 mm; A2:30 mm; s1:16 mm; H:102 mm;

Static load, C0:246 kN; da min:156 mm; Fatigue limit load, Cu:7.5 kN; Characteristic rolling element frequency, BSF:4.4 Hz; Da max:284 mm; rs min:4 mm; f0:13.6; Nlim (grease):2,200 rpm; ra max:3 mm; Mass:18.5 kg;

Holder Surface Treatment:Not Provided; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):96; Number of Bearings:Double; Seals:DD (Contact Rubber S; Thickness, Height Indication:T, h Configurable; Bearing Part Number:6005; Bearing Material:[S